Interior & Exterior Painting Services
Meticulous surface preparation, moisture-tested bonding primers, and Pacific Northwest weather-guard coatings backed by 25 years of licensed craftsmanship.
Oregon CCB #216419
Licensed, Bonded & Insured General Contractor
25+ Years in Business
Established Feb 2005 in Hillsboro, OR
100% Satisfaction Guarantee
Direct on-site supervision by our licensed team on every project
Tri-County Metro Coverage
22+ verified service cities across Washington, Multnomah & Clackamas
Exterior Coatings Engineered for Pacific Northwest Moisture
In Oregon, 90% of a paint job's lifespan is determined by surface preparation. Rubi Construction LLC never rushes the preparation phase. We eradicate moss down to the root, scrape and sand peeling surfaces, apply high-adhesion bonding primers to bare timber, seal every casing joint with elastomeric polyurethane, and back-roll premium acrylic coatings for decades of weather defense.
Licensed, Bonded & Insured Oregon General Contractor (CCB #216419)
Over 25 years of master exterior weather-shielding and spray cabinet finishes
Factory-Grade Cabinet Enamel & Interior Finishes
Oregon CCB #216419 • Catalyzed Urethane Enamel & Hand-Prepped Finish
Our Painting Specialties
Weather-shield exterior coatings, zero-VOC interior living space finishes, and factory-grade spray cabinet conversions.
Pacific Northwest Weather-Shield Exterior Coatings
Oregon exteriors fail from improper preparation and moisture entrapment. We eradicate moss and mildew with biodegradable anti-fungal washes, scrape failing paint, apply high-adhesion oil/acrylic bonding primers to exposed cedar, seal all trim seams with elastomeric polyurethane, and spray two complete topcoats of Sherwin-Williams Emerald or Miller Evolution.
Craftsmanship Specifications:
- Commercial hot-water pressure wash & moss spore eradication
- Hand carbide scraping & feathered mechanical edge sanding
- Full exterior bonding primer over raw wood & tannin-rich cedar
- OSI Quad MAX elastomeric joint sealing on all window & corner trim
- Two full topcoats of 100% acrylic latex spray-applied & back-rolled
Precision Interior Living Space Finishes
Crisp lines, flawless drywall repairs, and durable zero-VOC washable coatings safe for children and pets. We erect dust containment barriers, repair settled drywall seams and texture pops, and apply durable washable satin and matte finishes.
Craftsmanship Specifications:
- Floor-to-ceiling zip-wall dust containment & heavy canvas drops
- Drywall nail pop remediation, skim coating & orange-peel matching
- Zero-VOC premium washable interior paints (Sherwin-Williams Cashmere)
- Ultra-smooth enameled baseboards, door casings & crown molding
- Razor-sharp cut lines along ceilings, accent walls & woodwork
Factory-Grade Cabinet Refinishing & Lacquer Conversions
Transform dated oak, alder, or maple kitchen cabinetry into durable factory-finish showpieces. Doors and drawer fronts are detached, degreased, machine-sanded, primed with bonding sealers, and spray-finished in controlled conditions with industrial conversion urethane enamel.
Craftsmanship Specifications:
- Cabinet doors & drawers finished in a dust-controlled spray environment
- Industrial chemical degreasing & mechanical profile sanding
- High-solids catalyzed bonding primer (Sherwin-Williams Gallery Series)
- Rock-hard washable enamel finish resistant to kitchen grease & chipping
- Reinstallation with soft-close Blum hinges & modern hardware pulls
Painting FAQs
Straightforward answers on surface preparation, moisture testing, paint brand selections, and cabinet durability.
Why does exterior paint peel prematurely in western Oregon?
Peeling in the Pacific Northwest is almost always caused by painting over damp wood, skipping primer on exposed cedar, or failing to seal butt joints. When moisture enters unsealed joints behind the paint film, sun exposure causes vapor expansion that pushes the paint off. We thoroughly test wood moisture content with a digital pin meter before applying our full primer and elastomeric sealant envelope.
What paint brands and formulations do you use?
We specify premium, weather-tested coatings: Sherwin-Williams (Emerald, Duration, SuperPaint) and local Oregon-manufactured Miller Paint (Evolution). For kitchen cabinets, we use industrial catalyzed waterborne urethane conversion enamels designed for high chemical and scratch resistance.
Do you back-roll exterior paint when spraying siding?
Yes, always on textured fiber-cement, rough-sawn cedar, and T1-11 siding. While spraying distributes the paint uniformly, back-rolling with a heavy-nap roller works the wet coating deep into wood pores, grain fissures, and joints to form a continuous waterproof barrier.
Does Rubi Construction LLC supervise painting crews directly?
Yes. Our experienced project managers personally inspect surface preparation, verify that caulking and primer coats are fully cured, and conduct the final walk-through before close-out under Oregon CCB #216419.
Ready to Protect Your Home With Weather-Shield Coatings?
Contact Rubi Construction LLC directly at (503) 431-9399 for an on-site moisture evaluation and detailed CCB #216419 painting proposal.